Replacing Garage Door Springs in Perth: What Sets the Price
Spring type, door weight and whether the pair is changed together. Here is how each one moves the quote, and why we never guess it.
Quick Answer
The cost of a garage door spring replacement in Perth depends on three things: the kind of spring your door uses (a torsion bar above a sectional door, extension springs along the sides, or the tensioned axle inside a roller door), how heavy the door is, and whether one spring or a matched pair is changed. We identify the spring, weigh up the door, and quote a fixed price before releasing any tension.
Spring Jobs Compared
Springs hold the weight of the door, so the work is mostly about controlling stored tension safely. The rows below show what each job covers and what moves its price.
| Job | What the Job Covers | What Moves the Price | Before You Call |
|---|
Spring sizes are matched to your door on site. The written price is agreed before we release or add any tension.
What Changes the Cost of New Springs
Door weight
Heavier doors need thicker wire and longer springs. Insulated panels and double widths add weight, and the springs must be sized to carry it.
Single spring or a pair
Two springs on one door age together. Changing only the broken one often means a second call-out soon after, so we price both ways.
Spring type
Torsion, extension and roller door springs each need different parts and fitting time. Knowing which you have narrows the quote before we arrive.
Cables and drums
A spring that lets go can fray a cable or jump it off its drum. Any extra parts are listed on the quote before work starts.
Common Spring Calls and How They Are Quoted
A loud bang, then a heavy door
Classic sign a torsion spring has snapped. We check the second spring and both cables before giving the price.
Opener lifts the door a little, then stops
The motor senses the extra weight and gives up. The price covers the spring; we also check the opener has not been strained.
Rusted springs on older doors
Springs left in place for many years can corrode. Rusty fixings can add time, and that shows on the quote up front.
Roller door that will not stay open
Often a tension adjustment rather than a new spring. If adjustment will do, that is what we quote.
Adjust, Replace or Upgrade the Springs?
Not every spring problem means new springs. Some only need re-tensioning, while some doors have outgrown the springs fitted to them.
Repair makes sense when
- A roller door has lost a little tension but the spring is intact
- The springs are sound and the door is simply out of balance
- Only the cables or pulleys have worn
Replacement is worth a look when
- There is a visible gap in a torsion coil
- An extension spring has stretched or snapped
- Springs are heavily rusted or the door has been made heavier since they were fitted
- The second spring of a pair is the same age as the one that broke
How We Price a Spring Job
Send a photo of the spring
A picture of the bar above the door, or of the springs along the tracks, tells us the type. Add whether the door is single or double.
We size the springs on site
We measure the door and the existing springs, check cables and drums, and confirm what needs replacing.
Written price, then the fit
You approve the written price. We then fit, tension and balance-test the door, and show you it runs smoothly.
Related Pages
Frequently Asked Questions
We advise against it. A wound torsion spring stores enough energy to break a wrist or throw a winding bar across the garage. Roller door springs are just as dangerous because the tension sits inside the axle. Leave the door closed and let someone with the right bars and clamps do it.
Yes, in almost every case. The spring is a wear part, and replacing it puts a sound door back to full working order. It only makes sense to look at a new door if the panels, curtain or tracks are also failing.
Springs are rated by cycles, one open and one close. A door used many times a day wears them out sooner than one opened once in the morning. Grit and summer heat in Perth shorten the life of springs that are never cleaned or checked.
It may move a little, but do not use it. Without the spring the opener and the cables take the full weight, and the door can drop without warning. Unplug the opener, keep the door shut if it is shut, and call us.
Both springs have done the same number of cycles, so the second is usually close behind. Fitting one new spring next to an old one can also leave the door unevenly balanced. We quote both options and explain the difference.
Ask for a Written Price
Prefer to call? (08) 5550 0311Door playing up?
Tell us what it's doing.
Describe the noise, the gap or the blinking light. We book a time window, ring when we're heading over, and price the fix before any work begins, anywhere across Perth's north-east and northern suburbs.